Whether it’s destroying compaction layers, slaying weeds, terminating cover crops, incorporating manure, or preparing the field for seeding, our Kubota Cultivators not only perform but excel.

Videos

Features

Durable frame design

The CU3001/CU3001P has a well-organised tine arrangement over 3 tine rows. The challenge to cope with long residues has been in focus during the design process ensuring optimum mixing and intensive cultivation. The tine spacing ensures a smooth optimum soil flow and mixing.

Triflex 700 tine

The auto-reset Triflex tine uses the well-known Kubota leaf spring system to ensure a high point pressure of 1543lbs (700kg) in work and a smooth release curve when the tine hits an obstacle. The Triflex tine with narrow design and special shape reduces the pulling forces while ensuring a perfect penetration even in heavily compacted soil. It is the perfect choice for deep loosening and working on heavier soil types strewn with stones.

Hollow tine design

One of the main advantages of the CU3001 tines is its strength and durable material. This is due to the hollow tine technology which allows the Triflex tine to flex sideways by up to 2.8” (7cm). With the tines being light (99lbs (45kg) for a non-stop tine), is very easy to take them off to adapt the cultivator to the working conditions and the tractor available.

Specific tine angle

Then there is the special shape of the tine with two working zones. The first lower zone of the tine with a reduced angle of 33° lifts and cracks the soil like a subsoiler. Due to angle and pressure of the soil above, the tine has a high penetration. In the second part of the tine, the angle is raised to 73° in order to ensure an excellent mixing of the soil with residues.

Share options

The Triflex 700 tines can be equipped with different shares to adapt to varying working depths and tasks. Seven options of share design are available with the patented Knock-on® system. It is the easiest way of changing parts on a cultivator, either to adapt the machine to the job to be done or to change wearing parts.

Levelling tines option

Levelling tines which are a very easy and economic way of levelling and to handle normal straw conditions on light to medium soil types. Levelling tines are spring loaded to avoid damages in stony or other difficult conditions. It ensures the individual release of tines and keep levelling quality even in stony conditions. The angle of the levelling tines can be adjusted for a perfect result.

Levelling discs option

When it comes to heavy amounts of residues the levelling discs are more suitable. Levelling discs are rubber suspended to avoid damages in stony or other difficult conditions. It ensures the individual release of discs and keep levelling quality even in stony conditions. The angle of the levelling discs can be adjusted for a perfect result.

Triple finger harrow

The rear triple finger harrow (CU3001P) provides levelling and controls weed development by pulling the weeds out of the ground so that the roots dry out in the sun. This is particularly important with rhizome and other weeds that could start growing again if they are pressed by a packer immediately after cultivation. Gauge wheels control the working depth of the machine. Working angle can be adapted mechanically and the pressure hydraulically to the required conditions.

Actipack Roller - for medium to heavy soils

The Actipack roller displays its superb working qualities especially on medium to heavy soils and also in wet, stony and sticky conditions thanks to the independent skids and adjustable knives. Scrapers support the cleaning effect. Leave a weatherproof surface and prevents for erosions. Results like an active soil implement.

Double Cage Roller - for light to medium soils

The double cage roller ensures a good crumbling and levelling effect. It has a high carrying capacity and it is used for precise depth control.

Single Cage Roller - for light to medium soils

10 bars ensure a good loading capacity and effective crumbling actions. Suitable for light to medium soils and dry working conditions

Easy adjustment and maintenance

The depth is adjusted by hydraulic cylinders and spacers on CU3001 or hydraulic on-the-go on CU3001P; and the levelling equipment with cranks.In addition, there is hardly any maintenance to be done apart from changing wearing parts.

Models

    CU3301P

    • Frame: Mounted Rigid
    • Working Width: 9'4" (2.85 m)
    • Min/Max: 90.0/240.0 HP

    CU3351

    • Frame: Mounted Rigid
    • Working Width: 11'4" (3.42 m)
    • Min/Max: 110.0/270.0 HP

    CU3351P

    • Frame: Mounted Rigid
    • Working Width: 11'4" (3.42 m)
    • Min/Max: 110.0/270.0 HP

    CU3401F

    • Frame: Mounted Fold
    • Working Width: 12'6" (3.85 m)
    • Min/Max: 130.0/300.0 HP

    CU3401PF

    • Frame: Mounted Fold
    • Working Width: 12'6" (3.85 m)
    • Min/Max: 130.0/300.0 HP

    CU3451F

    • Frame: Mounted Fold
    • Working Width: 14'4" (4.40 m)
    • Min/Max: 150.0/325.0 HP

    CU3451PF

    • Frame: Mounted Fold
    • Working Width: 14'4" (4.40 m)
    • Min/Max: 150.0/325.0 HP

    CU3501F

    • Frame: Mounted Fold
    • Working Width: 16'1" (4.90 m)
    • Min/Max: 170.0/350.0 HP

    CU3501PF

    • Frame: Mounted Fold
    • Working Width: 16'1" (4.90 m)
    • Min/Max: 170.0/350.0 HP

Downloads

Brochures